Lisslune | Remote Control Duplicator

FEATURES:

ARE YOU CONCERNED ABOUT LOSING YOUR REMOTE CONTROLS AND THE EXPENSES ASSOCIATED WITH REPLACEMENTS?

The Remote Control Duplicator is the simplest and most economical solution for duplicating any wireless remote, vehicle key, garage door opener, and much more!

Advantages

• This tool facilitates the transmission of signals, allowing you to copy your current remotes. This ensures that a backup remote or an extra key is always available if the original is misplaced.

• The device can copy up to 4 buttons from one or multiple remotes, enabling you to combine the functions of four remotes into a single device! Each designated button (A, B, C & D) can operate separately.

• Using a single remote, you can open your garage door and unlock your vehicle, eliminating the hassle of carrying multiple keys.

• The infrared connection is smooth and protected through data encryption, ensuring secure operation.

• You can duplicate any compatible wireless remote key, with each key's data saved separately.

How to Use (SIMPLE!)

• Clear Code: Simultaneously press two buttons with two fingers (for example, A & B or B & C, etc.); the LED will flash quickly three times within around two seconds. Release one finger (keeping the other button pressed) and tap the loose button three times swiftly until the LED blinks. Then let go of both buttons. Finally, press any button on the remote.

• If the LED light turns off, it signifies that the clearing was successful (all four buttons are now empty). If the light stays on, the original code hasn’t been cleared correctly. Repeat the clearing process until it’s accomplished successfully. You can clear and copy the code as many times as required.

• Copy: Hold the original remote in your left hand and the duplicator in your right, keeping both devices as close as possible. Simultaneously press the first buttons on both remotes. After approximately two seconds, the LED will blink rapidly twice. After another second, the LED will keep blinking. Release the buttons, then press the button on the original remote. The light will stay on, confirming that the first button code has been copied to the other remote. This method can be repeated for additional keys. If successful, the duplicate remote will operate just like the original.

• Restore: If you accidentally cleared a copied setting, press the bottom two buttons simultaneously on the remote. The LEDs will flash quickly. Release after pressing any button. A prolonged light signal will indicate that the remote code has been restored. It’s vital to remove the old code from the original remote prior to using the duplicating remote.

• First, clear the existing code;

• Redo the copying for the unsuccessful key after the code has been cleared; there's no need to replicate the other buttons.
• Then clear the remaining codes again.

• Restore the code; this will replace the original buttons that weren't copied successfully with new codes, while retaining the buttons that did copy correctly. Repeat these steps until all buttons are copied successfully.

ORDER YOUR REMOTE CONTROL DUPLICATOR NOW WHILE STOCKS LAST!

Included in the package is 1 433 MHz Remote Control Duplicator.

SPECIFICATIONS:

• Type: Control device

• Color: Black, Red, Blue, White

• Material: Plastic

• Weight: 0.1kg

• Function: Copying control device functionalities

• Design: Remote Control Duplicator

PACKAGE CONTENTS:

•  1* Remote Control Duplicator

PLEASE NOTE:

• Slight variations may exist due to manual measurements.

• The actual color may differ slightly from what is displayed in the images due to varying display and lighting conditions.